Introduce several common faults of Solar Garden Lights' solar mosquito killer lamps
1. The light is off
During use, it was found that the mosquito trapping lamp in the solar mosquito killing lamp was not on, but the load light of the controller running indicator was on. If there is a high voltage, it is judged that the lamp or ballast is damaged. If both ends of the tube are black, the tube needs to be replaced. Just replace the damaged ballast and lamps one by one to solve the problem of lamps not lighting up.
2. No high voltage light on
When it is found that the mosquito trap of the solar mosquito killer is turned on but there is no high voltage, it is necessary to check whether the high voltage net is loose or whether the electric shock wire is interspersed. If the high-voltage network is not loose and the contact wire is inserted normally, it can be judged that the high-voltage package is damaged, and the problem can be solved by replacing the new high-voltage package.
3. Sulfurized crystal of battery plate
If the battery plate of the solar mosquito killer has sulfide crystals, then it is necessary to check the battery voltage of the mosquito killer, because this kind of imagination is generally formed by the over-discharge of the battery, and it should be stated when the battery is charged that if the sulfide crystallizes Seriously, the battery plate should be replaced.